Toward Understanding the Enhanced Pseudocapacitive Storage in 3D SnS/MXene Architectures Enabled by Engineered Surface Reactions

The optimization of three-dimensional (3D) MXene-based electrodes with desired electrochemical performances is highly demanded. Here, a precursor-guided strategy is reported for fabricating the 3D SnS/MXene architecture with tiny SnS nanocrystals (≈5 nm in size) covalently decorated on the wrinkled Ti₃C₂T_x nanosheets through Ti−S bonds (denoted as SnS/Ti₃C₂T_x-O). The formation of Ti−S bonds between SnS and Ti₃C₂T_x was confirmed by extended X-ray absorption fine structure (EXAFS). Rather than bulky SnS plates decorated on Ti₃C₂T_x (SnS/Ti₃C₂T_x-H) by one-step hydrothermal sulfidation followed by post annealing, this SnS/Ti₃C₂T_x-O presents size-dependent structural and dynamic properties. The as-formed 3D hierarchical structure can provide short ion-diffusion pathways and electron transport distances because of the more accessible surface sites. In addition, benefiting from the tiny SnS nanocrystals that can effectively improve Na⁺ diffusion and suppress structural variation upon charge/discharge processes, the as-obtained SnS/Ti₃C₂T_x-O can generate pseudocapacitance-dominated storage behavior enabled by engineered surface reactions. As predicted, this electrode exhibits an enhanced Na storage capacity of 565 mAh g⁻¹ at 0.1 A g⁻¹ after 75 cycles, outperforming SnS/Ti₃C₂T_x-H (336 mAh g⁻¹), SnS (212 mAh g⁻¹), and Ti₃C₂T_x (104 mAh g⁻¹) electrodes.     

An Efficient and Stable MoS2/Zn0.5Cd0.5S Nanocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution by water splitting is highly important for the application of hydrogen energy and the replacement of fossil fuel by solar energy, which needs the development of efficient catalysts with long-term catalytic stability under light irradiation in aqueous solution. Herein, Zn_0.5Cd_0.5S solid solution was synthesized by a metal–organic framework-templated strategy and then loaded with MoS₂ by a hydrothermal method to fabricate a MoS₂/Zn_0.5Cd_0.5S heterojunction for photocatalytic hydrogen evolution. The composition of MoS₂/Zn_0.5Cd_0.5S was fine-tuned to obtain the optimized 5 wt % MoS₂/Zn_0.5Cd_0.5S heterojunction, which showed a superior hydrogen evolution rate of 23.80 mmol h⁻¹ g⁻¹ and steady photocatalytic stability over 25 h. The photocatalytic performance is due to the appropriate composition and the formation of an intimate interface between MoS₂ and Zn_0.5Cd_0.5S, which endows the photocatalyst with high light-harvesting ability and effective separation of photogenerated carriers.     

Journey from Small-Molecule Diyne Structures to 2D Graphdiyne: Synthetic Strategies

Graphdiyne (GDY) exhibits unique characteristics of a highly conjugated π system, evenly distributed nanopores, and a direct band gap. This has encouraged multidisciplinary research groups to investigate its application in energy conversion and storage, catalysts, electronic devices, sensing, and separation. Herein, the achievements of synthetic strategies for preparing small-molecule diyne structures (GDY substructure), 1D nanoribbons, and 2D GDY are presented. These studies may help future investigations into the basic structure-related properties of GDY and synthetic methodology for the future developments of GDY-related 2D carbon materials.     

Chemoselective Hydrogenation of 6-Alkynyl-3-fluoro-2-pyridinaldoximes: Access to First-in-Class 6-Alkyl-3-Fluoro-2-pyridinaldoxime Scaffolds as New Reactivators of Sarin-Inhibited Human Acetylcholinesterase with Increased Blood–Brain Barrier Permeability

Novel 6-alkyl- and 6-alkenyl-3-fluoro-2-pyridinaldoximes have been synthesised by using a mild and efficient chemoselective hydrogenation of 6-alkynyl-3-fluoro-2-pyridinaldoxime scaffolds, without altering the reducible, unprotected, sensitive oxime functionality and the C−F bond. These novel 6-alkyl-3-fluoro-2-pyridinaldoximes may find medicinal application as antidotes to organophosphate poisoning. Indeed, one low-molecular-weight compound exhibited increased affinity for sarin-inhibited acetylcholinesterase (hAChE) and greater reactivation efficiency or resurrection for sarin-inhibited hAChE, compared with those of 2-pyridinaldoxime (2-PAM) and 1-({[4-(aminocarbonyl)pyridinio]methoxy}methyl)-2-[(hydroxyimino)methyl]pyridinium chloride (HI-6), two pyridinium salts currently used as antidote by several countries. In addition, the uncharged 3-fluorinated bifunctional hybrid showed increased in vitro blood–brain barrier permeability compared with those of 2-PAM, HI-6 and obidoxime. These promising features of novel low-molecular-weight alkylfluoropyridinaldoxime open up a new era for the design, synthesis and discovery of central non-quaternary broad spectrum reactivators for organophosphate-inhibited cholinesterases.     

Synthetic Strategies of Carbon Nanobelts and Related Belt-Shaped Polycyclic Aromatic Hydrocarbons

The development of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons has gained momentum in recent years. This Minireview focuses on the synthetic strategies used in constructing these aesthetically appealing molecular nanocarbons. Examples of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons reported in recent years as well as some representative synthetic attempts in earlier times are discussed.     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

Resonance Assisted Chalcogen Bonding as a New Synthon in the Design of Dyes

Intramolecular chalcogen bonding in arylhydrazones of sulfamethizole is strengthened by conjugation in the π-system of a noncovalent five-membered ring. The S⋅⋅⋅O distance in the sulfamethizole moiety of these compounds ranges from 2.698(3) to 2.806(15) Å, which indicates its strong dependence on the attached arylhydrazone fragments. Information on the nature of the intramolecular chalcogen bond was afforded by DFT calculations.     

Total Synthesis of Terpioside B

The first total synthesis of terpioside B ( 1 ) has been accomplished. Key steps include the stereoselective installments of a set of challenging 1,2-cis-glycosidic linkages. Thus, α(1,4)-linked d -galactoside was effectively constructed from a 1,2-anhydrogalactose donor and an unprotected 1,6-anhydrogalactose acceptor by using a boron-mediated aglycon delivery (BMAD) method. In addition, α-l -fucofuranosides were stereoselectively and simultaneously constructed by remote group-assisted 1,2-cis-α-stereoselective glycosylations.     

Divergent Synthesis of Bioactive Dithiodiketopiperazine Natural Products Based on a Double C(sp3)−H Activation Strategy

This article provides a detailed report of our efforts to synthesize the dithiodiketopiperazine (DTP) natural products (−)-epicoccin G and (−)-rostratin A using a double C(sp³)−H activation strategy. The strategy's viability was first established on a model system lacking the C8/C8’ alcohols. Then, an efficient stereoselective route including an organocatalytic epoxidation was secured to access a key bis-triflate substrate. This bis-triflate served as the functional handles for the key transformation of the synthesis: a double C(sp³)−H activation. The successful double activation opened access to a common intermediate for both natural products in high overall yield and on a multigram scale. After several unsuccessful attempts, this intermediate was efficiently converted to (−)-epicoccin G and to the more challenging (−)-rostratin A via suitable oxidation/reduction and protecting group sequences, and via a final sulfuration that occurred in good yield and high diastereoselectivity. These efforts culminated in the synthesis of (−)-epicoccin G and (−)-rostratin A in high overall yields (19.6 % over 14 steps and 12.7 % over 17 steps, respectively), with the latter being obtained on a 500 mg scale. Toxicity assessments of these natural products and several analogues (including the newly synthesized epicoccin K) in the leukemia cell line K562 confirmed the importance of the disulfide bridge for activity and identified dianhydrorostratin A as a 20x more potent analogue.     

Large-Scale Synthesis of a Niche Olefin Metathesis Catalyst Bearing an Unsymmetrical N-Heterocyclic Carbene (NHC) Ligand and its Application in a Green Pharmaceutical Context

A large-scale synthesis of known Ru olefin metathesis catalyst VII featuring an unsymmetrical N-heterocyclic carbene (NHC) ligand with one 2,5-diisopropylphenyl (DIPP) and one thiophenylmethylene N-substituent is reported. The optimised procedure does not require column chromatography in any step and allows for preparation of up to 0.5 kg batches of the catalyst from simple precursors. The application profile of the obtained catalyst was studied in environmentally friendly dimethyl carbonate (DMC). Although VII exhibited low efficiency in cross-metathesis (CM) with electron-deficient partners, good to excellent results were noted for substrates featuring easy to isomerise C−C double bonds. This includes polyfunctional substrates of medicinal chemistry interest, such as analogues of psychoactive 5F-PB-22 and NM-2201 and two PDE5 inhibitors—Sildenafil and Vardenafil. Finally, a larger scale ring-closing metathesis (RCM) of a Vardenafil derivative was conducted in DMC, allowing for straightforward isolation of the expected product (23 g) in high yield and with low Ru contamination level (7.7 ppm).